Fluke Process A-CON-2AOC4 Analog Current Out, 2 Loops, 4-20mA
Model: A-CON-2AOC4 | UPC: 095969864152
Fluke Process A-CON-2AOC4 Analog Current Out, 2 Loops, 4-20mA
Model: A-CON-2AOC4
The analog output module generates output currents ranging from 0/4 to 20 mA for the field. For use with Fluke Process TV40 series thermal imagers.
The analog output module generates output currents ranging from 0/4 to 20 mA for the field. For use with Fluke Process TV40 series thermal imagers.
Fluke Process A-CON-2AOC4 Offers
Features
- Output ranges are preset by the manufacturer but can be changed later via WAGO-I/O-CHECK software
- The module has two short circuit-proof output channels and enables direct connection of two 2-line actuators on the connections AO 1 and ground or AO2 and ground
- Signals are output via AO 1 or AO 2
- In addition, the sense lines from 4-line actuators can be connected to the connections Sense AO1 and +Sense AO1 or Sense AO2 and +Sense AO2
- Both output channels have a common ground potential
- The output signal is electrically isolated
Fluke Process A-CON-2AOC4 Specifications
| Number of Outputs | 2 |
| Output Current | 0/4 to 20 mA |
| Current Consumption (Internal) | 80 to 110 mA |
| Load Impedance | <500Ω |
| Resolution | 16 bits |
| Conversion Time Type | 5 ms |
| Measuring Error | 25°C (77°F) <±0.05 % of the scale end value |
| Isolation | 500 V System/Supply |
| Wire Connection | CAGE CLAMP® |
| Cross Sections | 0.08 to 2.5 mm² / AWG 28 to 14 |
| Width | 12 mm (0.47") |
What's included with the Fluke Process A-CON-2AOC4
- Fluke Process A-CON-2AOC4 Analog Current Out, 2 Loops, 4-20mA
datasheet for the Fluke Process A-CON-2AOC4 Analog Current Out, 2 Loops, 4-20mA
manual for the Fluke Process A-CON-2AOC4 Analog Current Out, 2 Loops, 4-20mA
Ask a question about Fluke Process A-CON-2AOC4 Analog Current Out, 2 Loops, 4-20mA
Fluke Process A-CON-2AOC4 Specifications
| Number of Outputs | 2 |
| Output Current | 0/4 to 20 mA |
| Current Consumption (Internal) | 80 to 110 mA |
| Load Impedance | <500Ω |
| Resolution | 16 bits |
| Conversion Time Type | 5 ms |
| Measuring Error | 25°C (77°F) <±0.05 % of the scale end value |
| Isolation | 500 V System/Supply |
| Wire Connection | CAGE CLAMP® |
| Cross Sections | 0.08 to 2.5 mm² / AWG 28 to 14 |
| Width | 12 mm (0.47") |
What's included with the Fluke Process A-CON-2AOC4
- Fluke Process A-CON-2AOC4 Analog Current Out, 2 Loops, 4-20mA
